Part Number Hot Search : 
BU4812 00X00 D17010GF 4000B 25100 TIP31C 04012 HCT157
Product Description
Full Text Search
 

To Download MAXQ1850 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 ABRIDGED DATA SHEET
Rev 0; 1/09
KIT ATION EVALU ILABLE AVA
Secure Cryptographic Controller with Rapid Zeroization Technology
General Description Features
High-Performance, Low-Power, 32-Bit MAXQ30 RISC Core Single 3.3V Supply Enables Low Power/Flexible Interfacing DC to 16MHz Code Execution Across Entire Operating Range Up to 65MHz Cryptography Engine Execution to Reduce Processing Time On-Chip 2x/4x Clock Multiplier 33 Instructions 16-Bit Instruction Word, 32-Bit Internal Data Bus 16 x 32-Bit Accumulators Up to 16 General-Purpose I/O Pins 5V Tolerant I/O Virtually Unlimited Software Stack Optimized for C-Compiler (High-Speed/Density Code) Memory Features Security Features Additional Peripherals Low-Power Consumption
See the Detailed Features section for complete list of features.
MAXQ1850
The MAXQ1850 is a low-power, 32-bit RISC device designed for electronic commerce, banking, and data security systems. It combines high-performance, singlecycle processing, sophisticated tamper-detection technology, and advanced cryptographic hardware to provide industry-leading data security and secret key protection. Physical security mechanisms include environmental sensors that detect out of range voltage or temperature conditions, responding with an instantaneous zeroization of critical data. Four self-destruct inputs are provided for additional tamper response. An internal shield over the silicon provides protection from microprobe attacks. A high-speed internal ring oscillator is provided to thwart attacks that rely on controlling the clock rate of the chip. To protect data, the MAXQ1850 integrates several high-speed, analysis-resistant encryption engines. Algorithms supported in hardware include AES (128-, 192-, and 256-bit), DES, triple DES (2-key and 3-key), ECDSA (160-, 192-, and 256-bit keys), DSA, RSA (up to 2048 bits), SHA-1, SHA-224, and SHA-256. The advanced security features of the MAXQ1850 are designed to meet the stringent requirements of regulations such as ITSEC E3 High, FIPS 140-2 Level 3, and the Common Criteria certifications. The MAXQ1850 includes 256KB of flash memory and 8KB of secure, battery-backed data SRAM. Several communication protocols are supported with hardware engines, including ISO 7816 for smart card applications, USB (slave interface with four end-point buffers), an RS232 universal synchronous/asynchronous receivertransmitter (USART), an SPITM interface (master or slave mode support), and up to 16 general-purpose I/O pins. Other peripherals supported on the MAXQ1850 include a true hardware random-number generator (RNG), a real-time clock (RTC), a programmable watchdog timer, and flexible 16-bit timers that support capture, compare, and pulse-width modulation (PWM) operations.
Ordering Information
PART MAXQ1850-BNS+ TEMP RANGE 0C to +70C PIN-PACKAGE 40 TQFN-EP*
Applications
Electronic Commerce EMVTM Banking Secure Access Control Secure Data Storage Pay-per-Play Certificate Authentication Electronic Signature Generation
Note: A chip-scale BGA (CSBGA) version of the MAXQ1850 is in development. Contact the factory for more information. +Denotes a lead(Pb)-free/RoHS-compliant package. *EP = Exposed pad.
Pin Configuration and Selector Guide appear at end of data sheet.
EMV is a trademark owned by EMVCo LLC. SPI is a trademark of Motorola, Inc.
Note: Some revisions of this device may incorporate deviations from published specifications known as errata. Multiple revisions of any device may be simultaneously available through various sales channels. For information about device errata, go to: www.maxim-ic.com/errata.
________________________________________________________________ Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com.
ABRIDGED DATA SHEET
Secure Cryptographic Controller with Rapid Zeroization Technology MAXQ1850
Typical Operating Characteristics
(TA = +25C, unless otherwise noted.)
Refer to the full data sheet.
Block Diagram
JTAG/ DEBUG
TIMERS
RNG DES RSA
AES DSA
USART USB
256KB FLASH 16KB ROM 8KB NV SRAM
SPI ECDSA ISO 7816 GPIO MAXQ30 CORE CORE OSC RTC 32kHz CRYPTO OSC PLL 12MHz
MAXQ1850
NOTE: THE BLOCK DIAGRAM SHOWS A TYPICAL SYSTEM CLOCK USED TO SUPPORT USB OPERATION AT 12MHz. MULTIPLE EXTERNAL CRYSTAL/CLOCK OPTIONS ARE AVAILABLE.
8
_______________________________________________________________________________________
ABRIDGED DATA SHEET
Secure Cryptographic Controller with Rapid Zeroization Technology
Detailed Features
High-Performance, Low-Power, 32-Bit MAXQ30 RISC Core Single 3.3V Supply Enables Low Power/Flexible Interfacing DC to 16MHz Code Execution Across Entire Operating Range Up to 65MHz Cryptography Engine Execution to Reduce Processing Time On-Chip 2x/4x Clock Multiplier 33 Instructions Three Independent Data Pointers Accelerate Data Movement with Automatic Increment/Decrement 16-Bit Instruction Word, 32-Bit Internal Data Bus 16 x 32-Bit Accumulators Up to 16 General-Purpose I/O Pins 5V Tolerant I/O Virtually Unlimited Software Stack Optimized for C-Compiler (High-Speed/Density Code) Memory Features 256KB Flash, Composed of 512 Byte Sectors (1K Erase/Write Cycles per Sector) 8KB Battery-Backed Data SRAM Dedicated Cryptographic Memory Space Security Features Unique ID Tamper Detection with Rapid Key/Data Destruction Four Self-Destruct Inputs Hardware AES and DES Engines Public Key Cryptographic Accelerator for DSA, ECDSA, and RSA Real Hardware RNG and PRNG Hardware CRC-32/16 Unalterable, Battery-Backed Real-Time Clock Additional Peripherals Power-Fail Warning Power-On Reset/Brownout Reset JTAG I/F for System Programming and Accessing On-Chip Debugger USB I/F with Four End-Point Buffers ISO 7816 Smart Card UART with FIFO 16-Bit Programmable Timers/Counters with Prescaler, Capture/Compare, and PWM SPI and USART Communication Ports Programmable Watchdog Timer Low-Power Consumption 130nA Typical Current Draw in Battery-Backed Mode, Preserving 8KB NV SRAM and with Security Sensors Active (460nA with RTC Active)
MAXQ1850
Detailed Description
Refer to the full data sheet.
Note to readers: This document is an abridged version of the full data sheet. To request the full data sheet, go to www.maxim-ic.com/MAXQ1850 and click on Request Full Data Sheet.
______________________________________________________________________________________
11


▲Up To Search▲   

 
Price & Availability of MAXQ1850

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X